SN74AVC4T234
Overview
This 4-bit non-inverting bus transceiver uses two separate configurable power-supply rails to enable asynchronous communication between B-port inputs and A-port outputs. The A port is designed to track VCCA while the B port is designed to track VCCB.
- Wide operating VCC range of 0.9 V to 3.6 V
- 3.6-V I/O Tolerant to support mixed-mode signal operation
- Max tpd of 3.7 ns at 3.3 V
- Balanced propagation delays: tPLH = tPHL
- Low static-power consumption, 5-μA Max ICC
- Outputs disabled if either VCC goes to 0V
- ±3-mA Output drive at 1.8 V
- 26-Ω series resistor on A-side outputs
- Ioff supports partial power-down-mode operation
- Input hysteresis allows slow input transition and better switching noise immunity at input
